EM-6200  DIGITAL EMS
  • EM-6200  DIGITAL EMS
  • EM-6200  DIGITAL EMS
  • EM-6200  DIGITAL EMS

EM-6200 DIGITAL EMS

€53.00
Tax included

EM-6200 
DIGITAL EMS 

The Premier EMS is a fully digital battery operated pulse generator that sends electrical impulses to the nerves and underlying muscle groups. This unit is EMS which can be used for muscle stimulation. The device is provided with two controllable output channels, each independent of the other. A pair of electrodes can be connected to each output channel. The intensity level and settings are controlled by press buttons. 

Quantity

  • Security policy (edit with Customer reassurance module) Security policy (edit with Customer reassurance module)
  • Delivery policy (edit with Customer reassurance module) Delivery policy (edit with Customer reassurance module)
  • Return policy (edit with Customer reassurance module) Return policy (edit with Customer reassurance module)

The Premier EMS is a fully digital battery operated pulse generator that sends electrical impulses to the nerves and underlying muscle groups. This unit is EMS which can be used for muscle stimulation. The device is provided with two controllable output channels, each independent of the other. A pair of electrodes can be connected to each output channel. The intensity level and settings are controlled by press buttons. 

 

01 Channel: Dual, isolated between channels

02 Pulse Amplitude:  Adjustable, 0-110 mA peak into 500 ohm load each channel.

03 Wave Form: Asymmetrical Bi-Phasic Square Pulse

04 Voltage: 0 to 55V (Load: 500 ohm)

05 Power source: One 9 Volt Battery.

06 Size: 11.8cm(L) x 6 cm(W) x 3.1cm(H)

07 Weight: 157 grams with battery.

08 Pulse Rate: Adjustable, from 2 to 150 Hz, 1 Hz/step

09 Pulse Width: Adjustable, from 50 to 300 microseconds, 10 µs/step

10 On Time:  Adjustable, 2~90 seconds , 1 Sec./ step

11 Off Time:  Adjustable, 2~90 seconds , 1 Sec./ step

12 Ramp Time: Adjustable, 1~8 seconds, 1 Sec./ step, The "On"time will increase and decrease in the setting value.

13 Mode:  Three EMS Modes: C(Constant), S (Synchronous), A(Alternate)

14 Constant Mode(C): The pulse rate and pulse width are adjustable. It generates continuous stimulation is delivered.

15 Synchronous Mode(S): Output from both channels occurs synchronously. The "ON" time includes "Ramp Up" and "Ramp Down" time. Therefore, the setting of ON Time should be no less than two times of the "Ramp" time in this mode.

16 Alternate Mode(A): The stimulation of the CH2 will occur after Mode(A)           the 1st contraction of CH1 is completed. In this mode, the setting of ON Time should be no less than two times of the "Ramp" time. The OFF Time should be equal to or greater than the ON Time.

ON TIME ≥ Ramp up + Ramp down
OFF TIME≥IN TIME

17 Timer: Adjustable, from 5 to 60 minutes minutes and continue(C), 5 minutes each step.

18 Patient: Compliance Meter This unit can store 60 sets of operation records. Total recorded time is 999 hours.

19 Low Battery Indicator: A low battery indicator will show up when the battery is low.

20 Operating Condition:

Temperature:0°~40°C
Relative Humidity: 30%~75%
Atmosphere Pressure : 700Hpa~1060Hpa

21 Remark: There may be up to a +/-10% tolerance of all parameters and +/-20% tolerance of output amplitude & voltage.

EM-6200 DIGITAL EMS
100 Items

Specific References

You might also like